Smart Energy Week, Japan
Date
2-4 October 2024
Name
Smart Energy Week, Japan
Location
Makuhari Messe, Japan
Stand number
E19-1
If you’re looking for smart energy control devices and a partner you can rely on, I think you’ll find it worthwhile to visit our booth at Smart Energy Week in Tokyo this October. We’ll be showcasing intelligent, scalable, and flexible building blocks for your solutions, backed by global support that helps you reach your targets.
Flexible and intelligent devices
Whether you are looking to program a PLC solution from the ground up or want to quickly configure your devices using built-in factory software, we have what you need. At Smart Energy Week, you can get a thorough introduction to these control devices:
- The ASC 150 Storage, an effective, flexible, and scalable energy storage system controller with a wide range of options for greenfield and brownfield hybrid power applications
- The iE 250 intelligent energy controller that you can tailor to a wide range of future-proof energy control solutions and is incredibly easy to use for designers, installers, and operators
- And the AMC 600 programmable automation controller which gives you great performance and flexibility for land, marine, and wind power control applications with its modular, service-friendly design, compact size, and extensive customisation options.
Partnership is key when you’re developing smart energy solutions, and we are proud to be exhibiting with our Japanese partner RIX Corporation. DEIF will be represented by Sunil Rajotia, Fernando Niggli, Kaïré Ballaguy, and Alexandre Maravel.
Register today!
Smart Energy Week is on from 2 to 4 October at Makuhari Messe in Chiba, east of downtown Tokyo. Expected to draw around 42,000 visitors, the event gathers the latest and the brightest in renewable energy, from solar power and energy storage to smart grids.
Showcased products
-
Contact us to discuss your options
- 90 years of energy pioneering
- Manufactured at the highest standards
- Superior quality
- Unmatched service and support
- Made in Denmark
Flexible PV controller ASC 150 Solar
Single controller
- Useful for brownfield applications
- Makes sure that there is a minimum genset load
- Optimises the diesel genset load for high efficiency and low carbon footprint
Power management
- Automatically maximises PV power
- Automatically Load-dependent start and stop generators
- Automatically closes and opens breakers
- Optimises the diesel genset load for high efficiency and low carbon footprint
- Balances the loads in the system
Off-grid applications
- With a genset:
The controller uses the genset power measurements to calculate the set points for the PV power.
- With storage:
The controller combines the available PV power with the charge/discharge scheme to determine the set point for the PV power.
Grid-tied applications
- Feed surplus PV energy to the grid
- Charge the energy storage system (ESS)
- Regulate PV production to match the self-consumption
Flexible ESS controller ASC 150 Storage
Single controller:
- Useful for rental and brownfield applications
- Automatically charges and discharges the ESS
- Optimises the diesel genset load for high efficiency and low carbon footprint
- Requires power measurement and breaker feedback for other power sources
- Only one source: Can use the controller's 4th current measurement.
- Multiple power sources: Measurements from:
- Genset controllers (DEIF or third parties)
- Power meters
- Transducers -
Power management communication is not required
Power management:
- Automatically charges and discharges the ESS
- Automatically uses the ESS as spinning reserve for PV and microgrids
- Automatically starts and stops generators
- Automatically closes and opens breakers
- Optimises the diesel genset load for high efficiency and low carbon footprint
- Optimises the fuel consumption
- Balances the loads in the system
- Uses the plant logic
- Makes sure that the system is safe
Programmable automation controller with EtherCAT based I/O AMC 600
General specifications
- Cold start-up/Operating temperature: -40 to 70 °C
- Storage temperature: -40 to 85 °C
- Climate: 55 °C 97 % RH condensing
- Altitude: < 4000 m
- Vibration : 2.1 g (3.2 to 50 Hz) 1.0g (13.2 to 100 Hz)
- Shock: 50 g, 11 ms, half sine
- Bump: 25 g, 6 ms, half sine
- New platform formfactor – height of just 122 mm; depth 114 mm
- Design lifetime of no less than 10 years at 40 ºC surrounding temperatures
- Backplane mounted rack ensuring stable inter-module communication during operation in the entire products lifetime
- Fully production tested control system units lowering in-sourcing costs for series production at customer
- Suitable for Stationary, mobile, wind turbine retrofit
- Increased mechanical robustness
- Increased electrical protection levels ; ESD up to 6kV, up to 4kV on power inputs and 2kV on all signal and communication power for fast transients protections
- Designed the input circuits with protections against failure connections
- Cold start up in very low-temperature without pre-heating
- Proven electronics design for demanding condensing climates
- Built-in standard EtherCAT as native communication protocol for use as distributed I/O
- High density IO modules
- 24V DC Digital Inputs, Digital Outputs, Voltage / Current Analogue Inputs, PT-100 inputs
- Condition monitoring modules with High Frequency Analogue Inputs
- Support for most widely used fieldbusses : CAN/CANopen, PROFINET, RS-422/485, TCP/IP ( OPC UA, Modbus TCP etc. )
- Warranty: 2 years (not including wearable parts) with option to 5 totally years
System software, Operating System and Programming
- Operating system software with fail-safe update
- DEIF In-house maintained OS
- Real-time Patched Linux
- Web based configuration
- Simplified update procedures (no special tools, same for OS and firmware)
- Secured Certificated based access by standard protocols
- Customer manages all users (Operator, Service and Administrator), rights and credentials
- Network configuration of the 2 independent network interfaces.
- Network Time protocol support as Client
- Fail-safe system software start up with two OS images (active and fault-back)
- Fault-tolerant file system
- Web based configuration
- User management
- Programming with CODESYS V3.5 and C/C++
- Regular updates to newest CODESYS V3.5 Service Packs
- Secure Web based visualization
Advanced Programmable Controller AMC 300
- Fully production tested control system units
- Designed for a lifetime no less than 10 years @ 40 ºC
- Suitable for Offshore, Marine and near shore environments
- Superior robustness to vibrations, bumps and shocks
- Better ESD protection, Surge protection of I/O and Power supply
- Warranty: 2 years (not including wearable parts) with option to 3 years.
- Core specifications:
- Cold start-up/Operating temperature: -40 to 70 °C
- Storage temperature: -40 to 85 °C
- Climate: 55 °C 97 % RH condensing
- Altitude: < 4000 m
- Vibration : 2.1 g (3.2 to 50 Hz) 1.0g (13.2 to 100 Hz)
- Shock: 50 g, 11 ms, half sine
- Bump: 25 g, 6 ms, half sine
- Multifunction I/O modules with 24V DC Digital Inputs, Digital Outputs, Relay Outputs, Voltage / Current Analogue Inputs, Thermocouples, PT100/1000 inputs, Frequency Counter inputs, PWM outputs.
- Direct 3-phase 690 V voltage and 1/5A current measurement with class 0.5 Power measurement
- Modular I/O concept with distributed I/O nodes based on Standard EtherCAT and supporting EtherCAT cable redundancy
- CAN/CANopen, TCP/IP, RS-422/485 serial communication interfaces
- Operating system software with fail-safe update
- DEIF In-house maintained OS
- Real-time Patched Linux
- Discover the device via hostname (mDNS services)
- Web based configuration
- Simplified update procedures (no special tools, same for OS and firmware)
- Secured Certificated based access by standard protocols
- Customer manages all users, rights and credentials
- Network config on build-in 5 port switch (VLANs)
- Network Time protocol support as both Client and Server
- Fail-safe system software start up with two OS images (active and fault-back)
- Fault-tolerant file system
- Open software development with Linux, CODESYS V3 (IEC 61131-3)
- Regular updates to newest CODESYS V3.5 Service Packs
- Modbus TCP Client and Server library
- OPC UA Server (Open62541) library
