Not recommended for new designs
-
Contact us to discuss your options
- 90 years of energy pioneering
- Manufactured at the highest standards
- Superior quality
- Unmatched service and support
- Made in Denmark
Related Products
Programmable automation controller with EtherCAT based I/O AMC 600
General specifications
- Cold start-up/Operating temperature: -40 to 70 °C
- Storage temperature: -40 to 85 °C
- Climate: 55 °C 97 % RH condensing
- Altitude: < 4000 m
- Vibration : 2.1 g (3.2 to 50 Hz) 1.0g (13.2 to 100 Hz)
- Shock: 50 g, 11 ms, half sine
- Bump: 25 g, 6 ms, half sine
- New platform formfactor – height of just 122 mm; depth 114 mm
- Design lifetime of no less than 10 years at 40 ºC surrounding temperatures
- Backplane mounted rack ensuring stable inter-module communication during operation in the entire products lifetime
- Fully production tested control system units lowering in-sourcing costs for series production at customer
- Suitable for Stationary, mobile, wind turbine retrofit
- Increased mechanical robustness
- Increased electrical protection levels ; ESD up to 6kV, up to 4kV on power inputs and 2kV on all signal and communication power for fast transients protections
- Designed the input circuits with protections against failure connections
- Cold start up in very low-temperature without pre-heating
- Proven electronics design for demanding condensing climates
- Built-in standard EtherCAT as native communication protocol for use as distributed I/O
- High density IO modules
- 24V DC Digital Inputs, Digital Outputs, Voltage / Current Analogue Inputs, PT-100 inputs
- Condition monitoring modules with High Frequency Analogue Inputs
- Support for most widely used fieldbusses : CAN/CANopen, PROFINET, RS-422/485, TCP/IP ( OPC UA, Modbus TCP etc. )
- Warranty: 2 years (not including wearable parts) with option to 5 totally years
System software, Operating System and Programming
- Operating system software with fail-safe update
- DEIF In-house maintained OS
- Real-time Patched Linux
- Web based configuration
- Simplified update procedures (no special tools, same for OS and firmware)
- Secured Certificated based access by standard protocols
- Customer manages all users (Operator, Service and Administrator), rights and credentials
- Network configuration of the 2 independent network interfaces.
- Network Time protocol support as Client
- Fail-safe system software start up with two OS images (active and fault-back)
- Fault-tolerant file system
- Web based configuration
- User management
- Programming with CODESYS V3.5 and C/C++
- Regular updates to newest CODESYS V3.5 Service Packs
- Secure Web based visualization
Product videos
Tutorials
Installing the Multi-line 300 controller rack
