»Easy to install. Easy to operate. Full touch screen overview. In simple terms: Perfect.«

Anders Efraimsson, Chief Engineer, Stena Line

Contact us


Four predefined modes cover the entire route

Modular & intuitive

Operating the ferry route between Frederikshavn, Denmark, and Göteborg, Sweden, M/F Stena Gothica's power management system was fully upgraded in just three weeks with DEIF's new and modular PPM 300 power management solution.

For ease of operation, the installed solution offers four standard modes that cover the entire route. Auto for standard sailing, secure for near-coast sailing, harbour for harbour operation and shore for seamless shoreto-ship supply.

Fitted with DEIF's AGI touch screen, the delivered solution also improves overview and control for the crew.

"Our crew can easily control the four gensets onboard using the intuitive PPM 300 menues and the four standard operation modes. It doesn't get much simpler than that".

Stena Line Group

Stena Line Group is an international transport and travel service company with Europe's most comprehensive route network.

 

  • PS (1)

    Contact us to discuss your options

    - 90 years of energy pioneering
    - Manufactured at the highest standards
    - Superior quality
    - Unmatched service and support
    - Made in Denmark

    Contact us
Generator protection unit

Generator protection unit GPU 300

  • Comprehensive generator/busbar protection
  • Smart synchronization check
  • Supervision
  • High resolution 5" colour graphic display with push-buttons
  • Flexible and modular input/output with metal rack
  • Plug & play, auto-configure I/O modules and network
  • Integrated 5 × RJ45 ports with auto-detected multi-function
  • Access to all connected units in one point
  • Context-sensitive help in the controller display unit
  • Event and alarm log, with real-time clock
  • Pre-defined control settings
  • User-friendly logic configuration tool, based on ladder logic and function blocks with monitor operation
  • Password-protected, with customisable permission levels
  • 3-phase AC measurement, up to 690 V AC directly, class 0.5
  • Easy-to-use PC tool (PICUS)
  • Advanced alarm handling with latch and shelve possible
 More details
AC transducer for U, I, PA, f

AC transducer for U, I, PA, f TAS-311DG

  • Factory-configured transducer for voltage, current, frequency or phase angle measurement
  • Aux supply: from 57 to 690 V AC
  • Aux supply: 24 to 220 V DC
  • Class 0.5 measurement
  • Supply and measuring voltage up to 690 V
  • Pre-configuration or easy PC tool configuration
  • Configurable up to three output slopes
 Compare product More details
AC transducer for bi-directional current and power

AC transducer for bi-directional current and power TAS-321DG

  • Factory-configured transducer for bidirectional current measurement.
  • Aux supply: from 57 to 690 V AC
  • Aux supply: 24 to 220 V DC
  • Class 0.5 measurement
  • Supply and measuring voltage up to 690 V
  • Pre-configuration or easy PC tool configuration
  • Configurable up to three output slopes
 Compare product More details
AC transducer for active or reactive power

AC transducer for active or reactive power TAS-331DG

Transducer range, TAS 331DG - Features

The transducer range by DEIF has a long list of features

  • Factory-configured transducer for power or reactive power measurement.
  • Aux supply: from 57 to 690 V AC
  • Aux supply: 24 to 220 V DC
  • Class 0.5 measurement
  • Supply and measuring voltage up to 690 V
  • Pre-configuration or easy PC tool configuration
  • Configurable up to three output slopes
 Compare product More details
AC voltage and current with 90 ° pointer

AC voltage and current with 90 ° pointer EQ

  • Accuracy class: 1.5
  • 90 ° pointer deflection
  • IP52 (IP54 on request)
  • Customised and exchangeable scale available for 90 °
  • Measuring range: 40 to 800 V (Q48: 40 to 300 V), 1 to 60 A (Q48: 1 to 40 A)
 Compare product More details
Integrated systems

Integrated systems DM-4 marine

  • Internal system supervision
  • Engine control, monitoring and protection
  • 3-phase generator protections
  • Automatic synchronisation
  • Load sharing
  • Dual ARCnet bus communication lines for redundancy
  • Multiple display units and multiple Advanced Operator Panels
  • Interface to the DEIF advanced graphical touch screen AGI
  • 2 × Integrated RS-485 Modbus communication port
  • 2 × CAN bus port for J1939 engine supervision, CANopen
  • USB port for service software
  • Up to 690 V AC direct AC inputs
  • Alarm and event log
  • Advanced load-dependent start/stop calculations
  • Blackout prevention and recovery
  • Priority selection
  • Heavy consumer handling
  • Base load function
  • Trip of non essential load groups (preferential trip)
  • Advanced fuel optimisation features
  • One-touch auto sequences
  • Dynamic positioning (DP-2) operation with closed bus tie breaker
  • Fast dynamic load-share deviation protection
  • Fast thruster load reduction
  • Optimised load sharing
  • 1 × Modbus TCP/IP
  • Service software via ethernet for remote access
 More details