Solutions for diesel electric propulsion
Click the green dots to learn more about our products
PPU 300
The PPU 300 Paralleling and Protection Unit is a highly configurable controller designed for marine use.
MDR-2
The MDR-2 is a state-of-the-art combined differential protection and short-circuit protection relay for generator protection against internal short circuits (leaking currents).
MVR-200 series
The MVR-200 series combines reliable protection, control and measuring functionality in a single device for medium and high voltage applications.
CSQ-3
The CSQ-3 integrates synchroscope and check synchronising relay into a microprocessor-controlled, easy-to-install solution. CSQ-3 is a multi-function synchroscope meter.
EPQ96-2
The EPQ96-2 is a digitally controlled electronic unit that replaces normal motor potentiometers for control of electronic speed governors.
2FTQ & 2FQ
DEIF's robust double frequency meters are highly accurate and compact.
SIM-Q MKII
The SIM-Q MKII monitors the insulation resistance between the connected network and an earth/safety cable. Using a unique measuring principle, it measures the insulation resistance in AC networks up to 690 V and DC networks up to 1000 V.
MIC-2 MKII
Versatile and intuitive, DEIF’s multi-instrument MIC-2 MKII is perfectly suited for monitoring and analysis of all types of power systems.
EQ
The EQ is a versatile quadratic moving iron instrument for measuring AC currents and AC voltages within the range 16 to 65 Hz.
VDQ96-sw
The VDQ96-sw has been designed to save switchboard builders space and installation time and does not require installation of normal selector switch. The instruments measure phase-to-phase currents and is available in 96 mm size only.
WQ
The WQ, power meter, measures power or reactive power using a moving coil movement. The power meter has a built-in electronic watt or var transducer.
FQ & FTQ
With high immunity to 3rd harmonics, DEIF's frequency meters are suitable for all applications. The moving coil meters feature integrated electronics that convert frequency into analogue readings with accurate and linear readouts.
PFQ
The PFQ power factor meter measures cos phi with a moving coil movement and an electronic transducer.
ASK & ASR
Part of DEIF's current transformer range, these measuring transformers convert high current into lower nominal current value, thus making it possible to use instruments and relays with standardised values of rated current.
KBU
DEIF's split-core current transformers are cost-saving and easy-to-install units for responsible and efficient energy management solutions and for retrofitting existing installations.
AL8-2
With eight digital alarm inputs, three relay outputs and many flexible features, the AL8-2 alarm panel is suitable for alarm monitoring at industrial and marine plants.
AGI 400
A comprehensive HMI solution, DEIF’s AGI 400 series connects to all DEIF Multi-line controllers, as well as third party electronics, via standard defined communication protocols, featuring functionalities which eliminate the need for other instruments, thus saving you both space and wiring.
RMT-111Q96
DEIF's phase sequence meters are applied to check and indicate correct and incorrect connection of the phases plus phase breakage of a shore connection.
MIC-2 MKII
Versatile and intuitive, DEIF’s multi-instrument MIC-2 MKII is perfectly suited for monitoring and analysis of all types of power systems.
AMC 300
The robust and flexible AMC 300 controller allows you to build resilient solutions for marine and offshore applications. Designed by marine engineers for marine engineers, the Linux-based PLC platform includes industry-proven technologies like EtherCAT and is easy to specify, install, and maintain. The modular architecture ensures maximum design flexibility, and the rugged design and cutting-edge cyber security features ensure years of resilient and trouble-free operation.
AMC 600
With its modular, service-friendly design, compact size, and extensive customisation options, the AMC 600 offers great performance and flexibility for land, marine, and wind power control applications.
AGI 400
A comprehensive HMI solution, DEIF’s AGI 400 series connects to all DEIF Multi-line controllers, as well as third party electronics, via standard defined communication protocols, featuring functionalities which eliminate the need for other instruments, thus saving you both space and wiring.
XDi
XDi - Digitalisation of traditional analogue bridge indicators, creating a compact, easy-to-install, versatile and user-friendly solution to today's bridge indicator challenges.
MDR-2
The MDR-2 is a state-of-the-art combined differential protection and short-circuit protection relay for generator protection against internal short circuits (leaking currents).
MVR-200 series
The MVR-200 series combines reliable protection, control and measuring functionality in a single device for medium and high voltage applications.
CSQ-3
The CSQ-3 integrates synchroscope and check synchronising relay into a microprocessor-controlled, easy-to-install solution. CSQ-3 is a multi-function synchroscope meter.
EPQ96-2
The EPQ96-2 is a digitally controlled electronic unit that replaces normal motor potentiometers for control of electronic speed governors.
SIM-Q MKII
The SIM-Q MKII monitors the insulation resistance between the connected network and an earth/safety cable. Using a unique measuring principle, it measures the insulation resistance in AC networks up to 690 V and DC networks up to 1000 V.
MIC-2 MKII
Versatile and intuitive, DEIF’s multi-instrument MIC-2 MKII is perfectly suited for monitoring and analysis of all types of power systems.
VDQ96-sw
The VDQ96-sw has been designed to save switchboard builders space and installation time and does not require installation of normal selector switch. The instruments measure phase-to-phase currents and is available in 96 mm size only.
WQ
The WQ, power meter, measures power or reactive power using a moving coil movement. The power meter has a built-in electronic watt or var transducer.
FQ & FTQ
With high immunity to 3rd harmonics, DEIF's frequency meters are suitable for all applications. The moving coil meters feature integrated electronics that convert frequency into analogue readings with accurate and linear readouts.
PFQ
The PFQ power factor meter measures cos phi with a moving coil movement and an electronic transducer.
ASK & ASR
Part of DEIF's current transformer range, these measuring transformers convert high current into lower nominal current value, thus making it possible to use instruments and relays with standardised values of rated current.
KBU
DEIF's split-core current transformers are cost-saving and easy-to-install units for responsible and efficient energy management solutions and for retrofitting existing installations.
AL8-2
With eight digital alarm inputs, three relay outputs and many flexible features, the AL8-2 alarm panel is suitable for alarm monitoring at industrial and marine plants.
AGI 400
A comprehensive HMI solution, DEIF’s AGI 400 series connects to all DEIF Multi-line controllers, as well as third party electronics, via standard defined communication protocols, featuring functionalities which eliminate the need for other instruments, thus saving you both space and wiring.
PPU 300
The PPU 300 Paralleling and Protection Unit is a highly configurable controller designed for marine use.
PPU 300
The PPU 300 Paralleling and Protection Unit is a highly configurable controller designed for marine use.
PPM 300
Designed for applications in the marine and offshore industry, DEIF's innovative PPM 300 solution is a versatile, intelligent controller platform for power management and generator control.
MDR-2
The MDR-2 is a state-of-the-art combined differential protection and short-circuit protection relay for generator protection against internal short circuits (leaking currents).
MVR-200 series
The MVR-200 series combines reliable protection, control and measuring functionality in a single device for medium and high voltage applications.
CSQ-3
The CSQ-3 integrates synchroscope and check synchronising relay into a microprocessor-controlled, easy-to-install solution. CSQ-3 is a multi-function synchroscope meter.
EPQ96-2
The EPQ96-2 is a digitally controlled electronic unit that replaces normal motor potentiometers for control of electronic speed governors.
2FTQ & 2FQ
DEIF's robust double frequency meters are highly accurate and compact.
SIM-Q MKII
The SIM-Q MKII monitors the insulation resistance between the connected network and an earth/safety cable. Using a unique measuring principle, it measures the insulation resistance in AC networks up to 690 V and DC networks up to 1000 V.
MIC-2 MKII
Versatile and intuitive, DEIF’s multi-instrument MIC-2 MKII is perfectly suited for monitoring and analysis of all types of power systems.
VDQ96-sw
The VDQ96-sw has been designed to save switchboard builders space and installation time and does not require installation of normal selector switch. The instruments measure phase-to-phase currents and is available in 96 mm size only.
EQ
The EQ is a versatile quadratic moving iron instrument for measuring AC currents and AC voltages within the range 16 to 65 Hz.
WQ
The WQ, power meter, measures power or reactive power using a moving coil movement. The power meter has a built-in electronic watt or var transducer.
FQ & FTQ
With high immunity to 3rd harmonics, DEIF's frequency meters are suitable for all applications. The moving coil meters feature integrated electronics that convert frequency into analogue readings with accurate and linear readouts.
PFQ
The PFQ power factor meter measures cos phi with a moving coil movement and an electronic transducer.
ASK & ASR
Part of DEIF's current transformer range, these measuring transformers convert high current into lower nominal current value, thus making it possible to use instruments and relays with standardised values of rated current.
KBU
DEIF's split-core current transformers are cost-saving and easy-to-install units for responsible and efficient energy management solutions and for retrofitting existing installations.
AL8-2
With eight digital alarm inputs, three relay outputs and many flexible features, the AL8-2 alarm panel is suitable for alarm monitoring at industrial and marine plants.
AGI 400
A comprehensive HMI solution, DEIF’s AGI 400 series connects to all DEIF Multi-line controllers, as well as third party electronics, via standard defined communication protocols, featuring functionalities which eliminate the need for other instruments, thus saving you both space and wiring.
AGC 150 Generator Marine
The AGC 150 Generator Marine is a robust, cost-effective, and user-friendly non-synchronising generator control solution for demanding marine applications.
SIM-Q MKII
The SIM-Q MKII monitors the insulation resistance between the connected network and an earth/safety cable. Using a unique measuring principle, it measures the insulation resistance in AC networks up to 690 V and DC networks up to 1000 V.
ASK & ASR
Part of DEIF's current transformer range, these measuring transformers convert high current into lower nominal current value, thus making it possible to use instruments and relays with standardised values of rated current.
KBU
DEIF's split-core current transformers are cost-saving and easy-to-install units for responsible and efficient energy management solutions and for retrofitting existing installations.
AL8-2
With eight digital alarm inputs, three relay outputs and many flexible features, the AL8-2 alarm panel is suitable for alarm monitoring at industrial and marine plants.
AGI 400
A comprehensive HMI solution, DEIF’s AGI 400 series connects to all DEIF Multi-line controllers, as well as third party electronics, via standard defined communication protocols, featuring functionalities which eliminate the need for other instruments, thus saving you both space and wiring.
Remote Access Support
Take advantage of DEIF’s Remote Access Support that enables certified engineers to remotely identify, diagnose, and resolve issues with your power management system.
Switchboard equipment
Good logistics are crucial to maintaining competitive advantages.
We customise logo, scales and colours to customer specifications and deliver in no time, making an extra effort to ensure that our products reach their destination in record time, undamaged and ready for fast and easy commissioning and subsequent operation.
The main switchboard and a number of subdistribution switchboards form the electrical central nervous system of the ship. Because they are critical to power supply, control and system monitoring, instrument robustness is among the most important quality parameters. Collaborating closely with classification societies, who audit our test results and methods before issuing certificates, our Type Test Lab performs measurements relevant for classification approvals and CE marking.
DEIF devices are ideally suited for intelligent marine power management systems that control, protect, and coordinate main and emergency diesel generators, bus tie breakers, and inverters on vessels with diesel electric propulsion. Our devices can integrate battery and shore power controllers in order to reduce emissions and run engines and gensets more efficiently.
We offer several controller platforms that are ideally suited for diesel electric propulsion – from the off-the-shelf PPM 300 advanced power management system to the highly configurable PPU 300 paralleling and protection unit (available with a built-in CODESYS PLC environment). And we offer engineered solutions based on both platforms.
For advanced applications and integrations, we offer the robust and flexible AMC 300 or AMC 600 PLCs. In addition, our MVR range of medium voltage relays offer efficient AC protection. And besides controllers, we offer user-friendly graphical interfaces, shutdown units, and a complete range of user-friendly switchboard and bridge instrumentation that give crews a great overview of critical systems on the ship – from rudder angle indicators to wind sensors.
With the Blueflow energy management system, crews can save fuel and reduce emissions by following suggestions based on real-time information about current operating conditions.
Short lead times and timely delivery
Our extensive manufacturing capacity allows us to meet any volume demand – regardless of geographical destination. We work hard to make sure our customers receive orders as quickly as possible, and we ship standard products in less than 7 days.
We manufacture all our products in-house at our Danish HQ in Skive to ensure we continue to meet demand and reduce customer lead times. So if you are struggling to get hold of control products through your usual supply channels, there has never been a better time to talk to DEIF.
Read our offshore support and specialised vessels guide
-
Contact us to discuss your options
- 90 years of energy pioneering
- Manufactured at the highest standards
- Superior quality
- Unmatched service and support
- Made in Denmark
