Green, reliable hybrid power and microgrid solutions
Read our hybrid application guide
Increasing environmental concerns and consumer demand for green power make hybrid and microgrid power more popular than ever. A hybrid microgrid combines two or more power sources, often including renewables, and is an optimum solution for achieving optimum power system reliability and resilience while cutting carbon emissions, saving fuel, and reducing maintenance requirements.
DEIF offers intelligent and reliable control solutions for a wide range of greenfield and brownfield hybrid applications, allowing you to design green and reliable power solutions that can be scaled and reconfigured as required and which can include fossil and renewable power sources plus energy storage.
Greenfield or brownfield?
- In greenfield applications, you design a hybrid power plant with DEIF power/energy management systems (PMS/EMS) from the ground up. DEIF controllers allow you to design for a wide range of solutions with built-in features that ensure flexibility, scalability, reliability, and redundancy.
- In brownfield applications, you integrate single DEIF hybrid controllers in existing power plants with 3rd party controllers or a pre-existing EMS/PMS, expanding the solution with a wide range of control options. You can also deploy them in standalone off-grid or mains parallel applications.
Watch the recorded webinar and learn about ASC Brownfield Open Power Management and Hybrid News
Greenfield applications
Brownfield applications
Short lead times and timely delivery
Our extensive manufacturing capacity allows us to meet any volume demand – regardless of geographical destination. We work hard to make sure our customers receive orders as quickly as possible, and we ship standard products in less than 7 days.
We manufacture all our products in-house at our Danish HQ in Skive to ensure we continue to meet demand and reduce customer lead times. So if you are struggling to get hold of control products through your usual supply channels, there has never been a better time to talk to DEIF.
-
Contact us to discuss your options
- 90 years of energy pioneering
- Manufactured at the highest standards
- Superior quality
- Unmatched service and support
- Made in Denmark
Advanced Genset Controller AGC 150 Hybrid
- Minimum Genset load
- Load calculation in terms of solar power
- Genset start/stop based on mains import/export
- Genset start/stop based on PV production
- PV included in mode: MPE Mains Power export/import
- PV included in mode: LTO Load Take over
- PV included in mode: Fixed Power
- PV included in mode: AMF Automatic Mains Failure
- PV included in mode: Peak Shaving
Flexible ESS controller ASC 150 Storage
Single controller:
- Useful for rental and brownfield applications
- Automatically charges and discharges the ESS
- Optimises the diesel genset load for high efficiency and low carbon footprint
- Requires power measurement and breaker feedback for other power sources
- Only one source: Can use the controller's 4th current measurement.
- Multiple power sources: Measurements from:
- Genset controllers (DEIF or third parties)
- Power meters
- Transducers -
Power management communication is not required
Power management:
- Automatically charges and discharges the ESS
- Automatically uses the ESS as spinning reserve for PV and microgrids
- Automatically starts and stops generators
- Automatically closes and opens breakers
- Optimises the diesel genset load for high efficiency and low carbon footprint
- Optimises the fuel consumption
- Balances the loads in the system
- Uses the plant logic
- Makes sure that the system is safe
Flexible PV controller ASC 150 Solar
Single controller
- Useful for brownfield applications
- Makes sure that there is a minimum genset load
- Optimises the diesel genset load for high efficiency and low carbon footprint
Power management
- Automatically maximises PV power
- Automatically Load-dependent start and stop generators
- Automatically closes and opens breakers
- Optimises the diesel genset load for high efficiency and low carbon footprint
- Balances the loads in the system
Off-grid applications
- With a genset:
The controller uses the genset power measurements to calculate the set points for the PV power.
- With storage:
The controller combines the available PV power with the charge/discharge scheme to determine the set point for the PV power.
Grid-tied applications
- Feed surplus PV energy to the grid
- Charge the energy storage system (ESS)
- Regulate PV production to match the self-consumption
Automatic sustainable controller ASC-4 Battery Single Controller
- Storage integration in hybrid applications
- ASC-4 sustainable controllers connect upto 16 gensets for Storage-Diesel
- Simple graphical configuration
- Communicates with BCU, BMS, or PCS over Modbus
- Charging/discharging based on SOC or Schedular Command timers
- Optimal genset load constraint
- Controls functions, energy source or power source
- Grid-forming, grid-following, or droop mode (virtual synchronous generator)
- Load dependent genset start/stop - Rental
- SOC dependent genset start/stop - Rental
- Minimum genset load constraint
- Ideal for self-consumption applications
- Highly customisable with user-friendly M-Logic tool
- Control of breaker
- Record time commissioning with DEIF Emulation
- uses and verifies the functions of the real system for test, production and design - Suitable for power management solutions fitted with AGC-4, AGC 150 or AGC 200 genset controllers
- Suitable for single controller solutions using multi-instruments such as DEIF’s MIB or MIC
Automatic sustainable controller ASC-4 Solar Single controller
- Solar integration in hybrid applications
- ASC-4 sustainable controllers connect upto 16 gensets for PV-Diesel
- Simple graphical configuration
- Maximised sustainable power penetration
- Minimum genset load constraint
- Ideal for self-consumption applications
- Highly customisable with user-friendly M-Logic tool
- Control of breaker
- Record time commissioning with DEIF Emulation
- uses and verifies the functions of the real system for test, production and design - Suitable for power management solutions fitted with AGC-4, AGC 150 or AGC 200 genset controllers
- Suitable for single controller solutions using multi-instruments such as DEIF’s MIB or MIC
Automatic genset controller AGC-4 Mk II
- Automatic Mains Failure sequence
- Multi-master Power Management
- Power Management Core (32dg)
- Power Management Extended (>32dg)
- RMB Transformer maintenance with up to 32 gensets
- PLC logic
- Engine CANbus
- Din rail mount
- Flexible Hardware
- Additional CANbus based I/O (9 x CIO modules)
- Redundant controller
- Redundant CANbus for Power mamangement
- N+X configuration
- Close Before Excitation / Run-up synchronization from 6 seconds
- DEIF digital AVR DVC550 support
- Multi purpose PID´s
- Gridcode compliant with: VDE AR-N 4110/4105 (Medium voltage, Germany, VDE AR-N 4105 (low voltage, Germany, EN 50549-1:2019 (Europe), ENA EREC G99 (United Kingdom)
- Touch Screen Support (TDU107)
- Tier4 final/stage5
- Emulation for easy training and FAT
- Hybrid EMS support (via ASC-4)
- Heavy consumer (via ALC-4)
- Fuel optimisation
- Fully compatible with AGC 150 and ASC-4
- TÜV pending and UL approved
Advanced graphical interface AGI 400
- Wide screen format
- True glass front
- Capacitive touch screen
- Multi-touch and Gestures
- Robust aluminium housing
- SD card slot for easy storage and updating
- USB hosts for printers, accessories, data storage and updating
- Dimmable LED backlight
- Web server for remote access from i.e. mobile devices
- 3 Ethernet ports with integrated switch
- Serial communication (RS-232, RS-422 and RS-485)
- Wide range of support for industrial protocols
- OPC UA Server and Client
- JAVA scripting
- CODESYS V3 (optional)
- Powerful ARM Cortex-A9 processor
- Plug-in module for CANbus (CANopen/J1939)
- Wide operating temperature -20°C to +60°C
- Marine certifications
- Certified for hazardous environments
- Available in 7", 10", 15" and 21" sizes
