PMS control architecture with a PLC gateway for hospitals
Click on the green dots to learn more about our products
AGC-4 MK II
![AGC 4 Mk II[2925]](https://deif-cdn-umbraco.azureedge.net/media/szxdlrap/agc-4-mk-ii-2925.png?width=1200&v=1da915236affd20&v=9)
The automatic genset controller AGC-4 Mk II is the world’s most comprehensive genset controller offering all necessary functions for protection and control
* Don’t forget to check out our switchboard and instrument accessories and HMI panels
AMC 600
PLC-based programmable automation controller (PAC) suitable for land, marine, and wind power control applications. It is class approved and designed to marine specifications and can withstand very harsh operating conditions.
ALC-4
Ideally suited for critical power applications, the ALC-4 integrates load handling into your power management system, eliminating the need for traditional PLC solutions.
AGC-4 MK II
The automatic genset controller AGC-4 Mk II is the world’s most comprehensive genset controller offering all necessary functions for protection and control
* Don’t forget to check out our switchboard and instrument accessories and HMI panels
GPS 300
DCS controllers coordinate several power sources while PLC devices control the utility and loads and act as a gateway to the BMS/SCADA system. The DCSes instantly and automatically switch to a different power source if the current source becomes unstable or unavailable. The switch can be carried out with or without synchronisation (open or closed transition).
The architecture is suitable for both short-break solutions (with a short blackout when switching power sources) and no-break solutions (where power for the load passes through a UPS so there are no interruptions in power).
A DVC 550 voltage regulator lets you start and synchronise generators in less than 10 seconds and helps control applications with high inductive loads because of step-up transformers. An ALC-4 load controller lets you prioritise your loads, depending on the available power after a blackout when running in Island mode (no grid power) with generators only.
Read our Hospital guide
Short lead times and timely delivery
Our extensive manufacturing capacity allows us to meet any volume demand – regardless of geographical destination. We work hard to make sure our customers receive orders as quickly as possible, and we ship standard products in less than 7 days.
We manufacture all our products in-house at our Danish HQ in Skive to ensure we continue to meet demand and reduce customer lead times. So if you are struggling to get hold of control products through your usual supply channels, there has never been a better time to talk to DEIF.
-
Contact us to discuss your options
- 90 years of energy pioneering
- Manufactured at the highest standards
- Superior quality
- Unmatched service and support
- Made in Denmark
